![]() ![]() Cut the red wire to the fan and attach one of the resistor wires between the two halves and cover with heat shrink tubing. Take a 100ohm resistor and solder a length of wire to each end and cover with heat shrink tubing. I have performed this mod on MY OWN radio without any adverse affects and my LDG AT-7000 atu still works as it should.īefore this mod after been turned on for an hour or so the temp meter on the radio would show around 50% on the scale (7 or 8 bars), after the mod the temp meter shows around 25% on the scale (4 bars).įirst remove the top cover and remove the fan from the radio, !!IF YOU DAMAGE YOUR RADIO YOU ONLY HAVE YOURSELF TO BLAME!! !! IF YOU ARE UNSURE ABOUT PERFORMING THIS MOD DON’T!!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |